TM 9-2320-289-20
4-22.1. BRAKE INDICATOR LIGHT WIRE REPLACEMENT.
This task covers:
a . R e m o v a l
b. Installation
INITIAL SETUP:
Equipment Condition
Both battery negative cables disconnected. (See paragraph 4-38)
1.
Disconnect
combination
valve
connector (3) from brake indicator
light bracket (1).
2.
Disconnect brake indicator light wire
(4) from combination valve (5) and
brake indicator light bracket (1).
3.
If damaged, remove screw (2) and
brake indicator light bracket (1).
b. INSTALLATION
1.
If removed, install brake indicator light
bracket (1) with screw (2).
2.
Connect brake indicator light wire (4)
to combination valve (5) and brake
indicator light bracket (1).
3.
Connect combination valve connector (3) to brake indicator light
FOLLOW-ON
C o n n e ct
TASKS:
both battery negative cables. (See paragraph 4-38)
Change 2
bracket (1).
TA702217
4-46.1/(4-46.2 blank)
