TM 9-2320-289-20
4 - 2 .
SERVICE HEADLIGHT MAINTENANCE.
This task covers:
a. Removal
c. Adjustment
b. Installation
INITIAL SETUP:
Equipment Condition
Too/s/Test Equipment
Both battery negative cables disconnected.
Screwdriver bit set, J-29843
(See paragraph 4-38)
a.
REMOVAL
NOTE
DO NOT tamper with headlight adjusting screws (6).
1.
Remove 2 screws (10), screws (5), and bezel (9).
2.
Unhook spring (4) from radiator support (3) and remove mounting ring (2).
3.
Pull out headlight (1) and disconnect from wiring harness connector.
4.
Remove 4 screws (8) and retaining ring (7). Remove headlight (1).
TA49886
4-48
Change 2