TM 9-2320-289-20
4-19.
BACK-UP LIGHT SWITCH REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Both battery negative cables disconnected. (See paragraph 4-38)
1.
Set parking brake and place transmission gearshift lever in “N” (Neutral).
2.
Unsnap back-up light switch (2) at tangs (5) to remove from steering column jacket (1).
3.
Disconnect lead from back-up light switch (2). Remove back-up light switch.
b.
INSTALLATION
1.
Connect lead to back-up light switch (2).
2.
Aline actuator (3) on back-up light switch (2) with hole in shift tube (4).
3.
Position back-up light switch (2) on cutout in lower part of steering column jacket (1).
TA49880
4-41
