TM 9-2320-289-20
4-22.
HORN AND HORN RELAY REPLACEMENT.
This task covers:
a. Removal
b.
Installation
INITIAL SETUP:
Equipment Condition
Both battery negative cables disconnected. (See paragraph 4-38)
Radiator grille removed. (See paragraph 10-2)
If removing
If removing
If removing
NOTE
horn (8), perform steps 1 and 2.
capacitor (6), perform steps 1 and 3.
horn relay (2), perform step 4.
1.
2.
3.
4.
Disconnect capacitor (6) lead from
horn (8).
Remove bolt (3) and horn (8).
Remove screw (7) and capacitor (6).
Remove nut (5) from radiator support
(4) if damaged.
NOTE
Tag wiring harness (1) connector
for installation.
Unplug horn
harness (1).
relay (2) from wiring
TA49884
4-45
