TM 9-2320-289-20
4-20.
HAZARD WARNING CONTROL REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Both battery negative cables disconnected. (See paragraph 4-38)
1.
Loosen screw (5) and remove hazard
warning button (4), spring (3), and
knob (2) assembly.
2.
Remove screw (5), button (4), and
spring (3) from knob (2).
b.
INSTALLATION
1.
Install spring (3), hazard warning
button (4), and screw (5) in knob (2).
2.
Install hazard warning button (4),
spring (3), and knob (2) assembly on
steering column (1) by tightening
screw (5).
FOLLOW-ON TASKS:
Connect both battery negative cables. (See paragraph 4-38)
Check operation of hazard warning system.
TA49882
4-43
