TM 9-2320-280-34
18-3. TRANSFER CASE REPAIR (Model 218) Cont'd)
31.
Position driven sprocket (15) in drive chain (14) and align driven sprocket (15) with front output
shaft (9).
32.
Pull up on mainshaft assembly (4) slightly and install drive chain (14) and driven sprocket (15) in
front case (13).
33.
Install snapring (23), thin bearing race (22), bearing (21), and thick bearing race (20) on front
output shaft (9).
34.
Remove hose clamp (3) from mainshaft assembly (4).
35.
Apply petrolatum to end of rear output shaft (16) to hold pilot roller bearings (18) in place.
Assemble fifteen pilot roller bearings (18) into end of rear output shaft (16).
36.
Install O-ring (17) in groove on end of mainshaft assembly (4).
37.
Install differential (19) over mainshaft assembly (4) with thrust blocks (24) facing up. Be sure
differential (19) seats on mainshaft assembly (4).
38.
Install rear output shaft (16) on differential (19). Push output shaft (16) over O-ring (17).
18-21
