TM 9-2320-280-34
18-3. TRANSFER CASE REPAIR (MODEL 218) (Cont' )
d
59.
Install O-ring (13) on pinion adapter (10).
NOTE
Note number stamped on driven gear.
60.
Install driven gear (14) into pinion adapter (10).
NOTE
Numbers on pinion adapter represent number stamped on driven gear. When
installing adapter, numbers on adapter must match with numbers on transfer case
housing.
61.
Install and align pinion adapter (10) into rear retainer (6) with clamp (12) and capscrew (11).
Tighten capscrew (11) to 15 lb-ft (20 N.m).
FOLLOW-ON TASK: Install transfer case (para. 8-3).
