TM 9-2320-280-34
18 - 3. TRANSFER CASE REPAIR (Model 218) (Cont' )
d
7.
Place front case (3) on transfer case support stand.
8.
Install input gear flat bearing race (17) and thrust bearing (16) in counterbore in front case (3).
9.
Install flanged O.D. bearing race (15) on input gear (14) and install input gear (14) in front case (3).
10.
Install mainshaft thrust bearing (13) in recess in inputgear (14).
11.
Assemble planetary assembly (24), thrust washer (23), annulus gear (22), and annulus gear thrust
washer (19), and install snapring (18).
12.
Ensuring that three plastic pads (21) are in place on range fork (20), install range fork (20) in
annulus gear (22).
18-17
