TM 9-2320-280-34
This task covers:
Installation
INITIAL SETUP:
Applicable Models
Manual References
M997A2, M1025A2, M1035A2, M1043A2,
TM-9-2320-280-10
M1045A2, M1097A2
TM 9-2320-280-20
TM 9-2320-280-24P
Tools
Equipment Condition
General mechanic's tool kit:
Transmission/transfer case assembly prepared for
automotive (Appendix G, Item 1)
installation (para. 7-10).
Materials/Parts
General Safety Instructions
Lockwasher (Appendix E, Item 104)
Torque converter must be installed with trans-
Lock pin (Appendix E, Item 170)
mission as an assembly. Transmission must be
Cotter pin (Appendix E, Item 168)
level.
Four tiedown straps (Appendix E, Item 250)
Do not use hand to free transmission/transfer
Locknut (Appendix E, Item 79)
case assembly of hang-ups or snags.
Locknut (Appendix E, Item 66)
Maintenance Level
Personnel Required
Direct support
One mechanic
One assistant
NOTE
The following maintenance procedure applies to vehicles with
4L80-E transmissions. Refer to para. 7-7 for 3L80 transmission
installation.
Installation
WARNING
Torque converter must be installed with transmission as an
assembly. Keep transmission level. The torque converter may
slide off front of transmission and cause injury to personnel or
damage to converter.
CAUTION
Torque converter must be properly installed in transmission or
transmission damage will result.
Safety chain must be routed under transmission oil cooler lines
or damage to cooler lines will result.
7-21
