TM 9-2320-280-34
7-8. TRANSMISSION/TRANSFER CASE ASSEMBLY REMOVAL (4L80-E) (Cont'd)
5.
Disconnect wiring harness connector (24) from transmission (7).
6.
Disconnect connectors 495/496 (25) and 497/498 (22) from input speed sensor (26) and output
speed sensor (23).
7.
Remove two capscrews (19), washers (21), and clamps (20) from sensors (23) and (26).
8.
Disconnect harness leads 359F/349A (29) from RPM sensor (13) and lead 349A (28) from leads
350B/359A/355A (27).
9.
Remove capscrew (18), lockwasher (16), and two ground cables 3A and 55A (17) and alternator
ground (15) from cylinder head (14). Discard lockwasher (16).
7-17
