TM 9-2320-280-34
7-9. TRANSMISSION/TRANSFER CASE ASSEMBLY INSTALLATION (4L80-E) (Cont'd)
17.
Connect harness leads 359F/349A (2) to RPM sensor (1) and lead 349A (20) to leads 350B/
359A/355A (19).
18.
Install two ground cables 3A and 55A (5) and alternator ground (4) on cylinder head (3) with lock-
washer (6) and capscrew (7).
19.
Connect wiring harness connector (14) to transmission case connector (13).
20.
Connect connnectors 497/498 (15) and 495/496 (16) to output and input speed sensors (12) and (17)
on transmission (8).
21.
Install wiring harness (18) to sensors (17) and (12) with two clamps (9), washers (10), and
capscrews (11).
22.
Connect transfer case shift rod (24) to transfer case (22) with washer (23) and lock pin (21).
7-26
Change 2
