TM 9-2320-280-34
3-26. ENGINE PREPARATION (6.2 L AND 6.5 L) (Cont'd)
NOTE
Perform steps 22 through 24 for all vehicles except A2 series and M1123.
22. Install front support bracket (7) on water pump housing (6) with two nuts (8). Tighten
nuts (8) to 45 lb-ft (61 N.m).
23. Install power steering pump assembly (4) on alternator mounting bracket (5) with lockwasher (2)
and capscrew (1). Do not tighten capscrew (1).
24. Secure power steering bracket (3) to support bracket (7) with washer (11), lockwasher (10), and
capscrew (9). Do not tighten capscrew (9).
NOTE
Perform steps 24.1 through 24.4 for 6.5 L engines only.
24.1. Install power steering pump assembly (4) on alternator/power steering bracket (13) with
capscrew (12) and two capscrews (14).
Change 2
