TM 9-2320-280-34
3-26. ENGINE PREPARATION (6.2 L AND 6.5 L) (Cont'd)
38.
Connect four harness boots (8) to glow plugs (9).
39.
Connect leads 569A (5) and 569B (6) to cold advance switch leads (7).
40.
Install wiring harness (1) on rocker arm cover bracket (2) with clamp (4) and capscrew (3).
NOTE
Perform step 42 for 6.2 L only.
Perform step 43 for 6.5 L only.
41.
Connect leads 54A (14) and 569B (15) to fuel injection pump terminals (16) and (17).
42.
Connect lead 315A (24) and 315B (23) to transmission kickdown switch leads (22).
43.
Connect leads 359E/355A/350B (20) to transmission TP sensor lead (18).
44.
Connect harness connector (13) to glow plug controller (19).
45.
Install harness (1) on intake manifold (12) with clamp (21), lockwasher (10), and nut (11).
3-198
