TM 9-2320-280-34
3-26. ENGINE PREPARATION (6.2 L AND 6.5 L) (Cont'd)
NOTE
Perform steps 17 through 21 for all vehicles except M997A2,
M1025A2, M1035A2, M1043A2, M1045A2, M1097A2, and M1123.
17. Apply sealing compound to two flanged-head capscrews (13).
18. Install alternator mounting bracket (14) on engine (19) with two flanged-head capscrews (13).
Tighten capscrews (13) to 48 lb-ft (65 Nm).
19. Install alternator adjusting bracket (12) on alternator mounting bracket (14) with washer (20),
lockwasher (21), and capscrew (22).
NOTE
Perform step 19.1 for 6.5 L alternator/power steering bracket configuration.
19.1. Install alternator/power steering bracket (27) on engine (19) with three capscrews (28). Tighten
capscrews (28) to 48 lb-ft (65 Nm).
20. Install support bracket (15) to exhaust manifold (18) with washer (16) and socket head screw (17).
Tighten socket head screw (17) to 25-33 lb-ft (34-45 Nm).
NOTE
Perform step 21 for vehicles with new support bracket configuration.
21. Install support bracket (23) on exhaust manifold stud (24) with washer (25) and nut (26). Tighten
nut (26) to 25-33 lb-ft (34-45 Nm).
3-193
