TM 9-2320-280-34
3-25. ENGINE INSTALLATION (6.5 L) (Cont'd)
68.
Install rear shield (33) on heat shield (29) with capscrew (30).
NOTE
Remove plug prior to installation of transmission oil dipstick tube.
69.
Apply RTV sealant on O-ring (38) and install O-ring (38) on transmission oil dipstick tube (28).
70.
Push dipstick tube (28) into opening (37) in transmission (36).
71.
Install dipstick tube (28) on cylinder head (35) with capscrew (39). Tighten capscrew (39)
to 25-37 lb-ft (34-50 N.m).
72.
Connect heater hose (41) to left transition (40) and right transition (42), and installed heater
hose (41).
73.
Install clamp (25) and rear heat shield (33) to transmission dipstick tube (28) with washer (26),
capscrew (27), and nut (31).
74.
Install transmission oil dipstick (34) in dipstick tube (28).
28
28
34
27
26
29
25
30
35
39
33
36
31
38
37
41
40
42
3-157
