TM 9-2320-266-34
4-20. Replacing the Pump Oil Seal.
(3) Apply sealer to the outer diameter of the new
seal.
a. General, The transmission pump oil seal can be re-
placed without removing the pump and reaction shaft sup-
(4) Place a new seal in the opening of the pump hous-
port assembly from the transmission case.
ing with its lip facing inward. Use tool C-3860 to drive the
seal into the housing until the tool bottoms (figure 4-41).
b. procedure.
(1) Remove the transmission from the vehicle
(2) Screw a seal remover tool C-3861) into the seal
as shown in figure 4-40.
Figure 4-41. lnstalling pump Oil Seal.
Figure 4-40. Removing Pump Oil Seal.
4-26
Change 7
