Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS-
1.
2.
3.
4,
5.
6.
1.
2.
3.
4.
5.
6.
7.
8.
C o n t i n u ed
TM 9-2320-289-34
Fabricate from steel tubing, 1/4 in. outside diameter. stock size 25 ft. long.
N S N 4 7 1 0 - 0 1 - 1 6 1 - 0 1 3 8 .
Cut to 78.68 in, long for Part Number 14036797.
Cut to 73.51 in. long for Part Number 14034599.
Install nut, NSN 4730-00-288-9390, Part Number
tubing.
9432075, on each end of
Flare ends of tubing. Nuts should turn freely on flares.
Use old pipe as a guide and bend steel tubing to same shape.
Figure C-16. Rear Brake Pipe
Fabricate from steel tubing, 3-16 in, outside diameter, stock size 25 ft. long,
NSN 2530-00-395-5144,
Cut to 38.59 in. long for Part Number 14036705.
Cut to 31.29 in, long for Part Number 14036706,
Cut to 41.54 in. long for Part Number 14036711.
Cut to 35.35 in. long for Part Number 14036712.
Install nut, NSN 4730-00-288-9390, Part Number 9432075, on each end of
tubing.
Flare ends of tubing, Nuts should turn freely on flares.
Use old pipe as a guide and bend steel tubing to same shape.
Figure C-17. Wheel Cylinder Pipe
C-9
