TM 9-2320-289-34
Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS-
1.
2.
3.
4.
1.
2.
1.
2.
1.
2.
1.
2.
Continued
Fabricate from steel tubing, 1/4 in. outside diameter, stock size 25 ft. long,
NSN 4720-01-161-0138.
Cut to 2.76 in. long for Part Number 14063339.
Install nut, NSN 4730-01-166-6347, Part Number
NOTE
137397, on tubing.
Dimensions in illustration are in millimeters.
Flare tubing in locations shown,
Figure C-2. Fuel Injector Pump Pipe
Fabricate from conduit, 3/4 in. inside diameter, stock size 15 ft. long,
NSN 5975-01-191-9851.
Cut to 54.00 in. long for Part Number 8906127.
Figure C-3. Body Wiring Harness Conduit
Fabricate from fuse link conductor, 0.8 mm, 18 gage,
Cut to 10.0 in. long for Part Number FLW-18.
Figure C-4. Fuse Link Wire
NSN 5920-01-218-3760.
Fabricate from fuse link conductor, 0,5 mm, 20 gage, NSN 5920-01-218-3759,
Cut to 10.0 in. long for Part Number FLW-20.
Figure C-5. Fuse Link Wire
Fabricate from fuse link conductor, 1,0 mm, 16 gage, NSN 5920-01-218-3761.
Cut to 10.0 in. long for Part Number FLW-16.
Figure C-6. Fuse Link Wire
C-5
