TM 9-2320-289-34
Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS -
Continued
1.
Fabricate from fuse link conductor, 3.0 mm, 12 gage, NSN 5920-01-219-0793.
2 .
Cut to 10.0 in. long for Part Number FLW-12.
Figure C-7. Fuse Link Wire
1.
Fabricate from steel tubing, 8/166 in. outside diameter, stock size 25 ft. long,
NSN 4710-00-420-4759.
2.
Cut to 73.95 in. long for Part Number 14045626.
3 .
Cut to 80.64 in. long for Part Number 14045628.
4 .
Install nut, NSN 4730-00-013-7398, Part Number 137398, on each end of tubing.
5.
Flare ends of tubing. Nuts should turn freely on flares.
6.
Use old pipe as a guide and bend steel tubing to same shape.
Figure C-10. Transmission Oil Cooler Pipe
C-6
Change 2
