TM 9-2320-289-34
Section Il. ILLUSTRATED MANUFACTURING INSTRUCTIONS -
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
C o n t i n u e d
Fabricate from steel tubing, 5/16 in. outside diameter, stock size 25 ft. long,
NSN 4710-00-420-4759.
Cut to 45.74 in. long for Part Number 14063323.
Cut to 65.22 in. long for Part Number 14072369.
Cut to 44.45 in. long for Part Number 14072371.
Cut to 7.92 in. long for Part Number 14072372.
Cut to 96.0 in. long for Part Number 31-0040.
Cut to 3.0 in. long for Part Number 31-0040A.
Install nut, NSN 5310-01-064-8672, Part Number 118538, on each end of
tubing.
Flare ends of tubing. Nuts should turn freely on flares.
Use old pipe as a guide and bend steel tubing to same shape.
Figure C-19. Heater Fuel Pipe
C-11 /(C-12 blank)
