TM 9-2320-289-34
6-20.
REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Con’t).
NOTE
Perform step 9 for all except M1028A2 and M1028A3.
9 .
If removed, install shim (4) on axle (5) housing with thinner edge facing front. Raise axle, alining
spring assembly (1) center bolt hole with hole in shim and axle housing. If removed, install
spacer (2). Install anchor plate (8) and 2 “U” bolts (3) with 4 washers (6) and nuts (7), Install all
nuts to uniform engagement on “U” bolts to retain and position anchor plate.
Change 2
6-139
