TM 9-2320-289-34
6-20.
REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Con’t).
5 .
6 .
7 .
NOTE
Ensure that position of shackle (18) is noted for installation.
Remove locknut (16), bolt (9), 2 washers (10), and remove shackle (18) from spring assembly
(1). Discard locknut.
If bushings (15, 17, and 20) are damaged, press out 3 bushings.
NOTE
If disassembling Ml 028, M1028A1, M1028A2, or M1028A3 auxiliary spring
(24) and spring assembly (1), perform steps 7 and 8.
Place spring assembly (1) and auxiliary spring (24) in vise and compress leaves near center bolt
(31). Remove 2 nuts (28), bolts (30), and clips (29), securing auxiliary spring to spring
assembly. File peened end of center bolt and remove nut (27), washer (26), and center bolt.
Discard center bolt.
Change 2
6-135
