TM 9-2320-289-34
6-20.
REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Con’t)
WARNING
Spring assembly (1) is heavy. Use extreme caution and assistance during
installation. Failure to follow this warning may result in serious injury to
personnel or damage to axle (5) assembly,
6.
Position spring assembly (1) over axle (5),
7 .
Install spring assembly (1) to hanger (23) with bolt (19), 2 washers (21), and new locknut (22).
DO NOT fully tighten locknut,
8 .
Install shackle (18) to hanger (13) with bolt (14), 2 washers (12), and new locknut (11). Tighten
locknuts (11, 16, and 22) to 110 Ib.-ft. (149 N.).
6-138
Change 1
