TM 9-2320-289-34
6-20.
REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Con’t).
WARNING
Use extreme caution when releasing tension from spring assembly (1) and
auxiliary spring (24). Springs are under considerable pressure and could
cause injury to personnel if suddenly released.
NOTE
Several leaves of spring assembly (1) will be loose when pressure on vise is
released.
8 .
Open vise slowly and allow all leaves to expand. Disassemble top retainer (25), auxiliary spring
(24), spacer (33), spring assembly (1), and bottom retainer (32).
b .
INSTALLATION
NOTE
If assembling M1028, M1028A1, M1028A2, or M1028A3 auxiliary spring (24)
and spring assembly (1), perform steps 1 and 2.
1.
Assemble bottom retainer (32), spring assembly (1), spacer (33), auxiliary spring (24), and top
retainer (25), Aline holes in spring assembly leaves, retainers, spacer, and auxiliary spring with a
long drift.
6-136
Change 2
