6-20. REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Cont)

6-20. REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Cont) - TM-9-2320-289-34_708

6-20. REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Cont) - TM-9-2320-289-34_710

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
692

TM 9-2320-289-34 6-20. REAR SPRING ASSEMBLY AND BUSHINGS REPLACEMENT (Con’t). Perform step 1.1 1.1. Place a suitable jack under axle (5). Remove 4 nuts (7), washers (6), adapter (7.1), 4 washers (7.2), 2 “U” bolts (3), and anchor plate (8). Remove spacer (2). NOTE for M1028A2 and M1028A3. M1028A2 and M1028A3 2 . Lower axle (5) until all tension is released from spring assembly (1). Remove shim (4) if present. Change 2 6-133

Privacy Statement
Press Release
Contact