TM 9-2320-289-34
6-16.
REAR AXLE DIFFERENTIAL REPAIR (M1009) (Con’t).
19.
Install spring on latching bracket (6) and install new snapring. Install latching bracket in
differential case (2) assembly. Install governor assembly (7), placing straight end of latching
bracket spring over and to outside of the engagement shaft to preload the latching bracket
against the governor assembly.
20.
Install bushing (4) until governor assembly (7) end play of 0.004-0.020 in. (0.102-0.508 mm)
is reached. Install bushing (5) until latching bracket (6) shaft end play of 0.000-0.003 in.
(0.000-0.076 mm) is reached.
NOTE
Shop rags placed around vise will help protect ring gear (3) teeth from
damage should ring gear fall during assembly.
Ring gear bolts (8) have left-hand threads.
21.
22.
Place differential case (2) assembly on axle shaft in vise with ring gear (3) alined as marked.
Install 10 bolts (8) and tighten alternately to 80 Ib.-ft. (108 N.m).
Install 2 side bearings (1) as tagged.
FOLLOW-ON TASKS:
l Install rear axle differential. (See paragraph 6-5)
TA50597
6-114
