6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Cont)

6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Cont) - TM-9-2320-289-34_678

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
660

TM 9-2320-289-34 6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Con’t). 4 . Install left-hand shim(s) (11) inside differential case (2). Install camform side gear (17), cam plate (1 6), and clutch pack assembly, indexing clutch plate (13) ears with differential case. 5 . Install shim (s) (21) on right-hand clutch pack. Install right-hand clutch pack and side gear (20) assembly inside differential case (2) assembly. NOTE l If new camform side gear (17) and/or side gear (20) was installed, perform steps 6-10 to obtain proper thrust block (23) clearance. l If new gears were installed and pinion shaft (10) will not line up, shim thickness will have to be decreased. 6. Install pinion shaft (10) and Iockscrew (9). TA50594 6-110

Privacy Statement
Press Release
Contact