6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Cont)

6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Cont) - TM-9-2320-289-34_678

6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Cont) - TM-9-2320-289-34_680

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
662

TM 9-2320-289-34 6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Con’t). NOTE If new camform side gear (17) and side gear (20) were installed, thrust block (23) should not be installed at this time. 11. install thrust block (23). 12. Position 2 thrust washers (19) and pinion gears (18) 180 degrees from each other, and indexed with teeth of camform side gear (17) and side gear (20). Rotate side gears and install thrust washers and pinion gears inside differential case (2) assembly. NOTE If original camform side gear (17) and/or side gear (20) were installed, original lockscrew (9) 13. Install pinion shaft (10) and should be discarded and new lockscrew installed. Iockscrew (9). TA50596 6-112

Privacy Statement
Press Release
Contact