c . ASSEMBLY - TM-9-2320-289-34

b . CLEANING AND INSPECTION - TM-9-2320-289-34_675

6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Cont) - TM-9-2320-289-34_677

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
659

TM 9-2320-289-34 6-16. REAR AXLE DIFFERENTIAL REPAIR (M1009) (Con’t). c . ASSEMBLY NOTE l Ensure that all components are lightly coated with lubricating oil as they are assembled. l If original components are to be reused, ensure that all thrust washers (19), shims (11 and 21), pinion gears (18), and clutch packs (13 and 15) are assembled on same side from which they were disassembled. l If assembling latching bracket and governor assembly, perform steps 19-21. 1 . Assemble right-hand clutch pack on side gear (20). Starting with clutch plate (13) and alternating, install 4 clutch plates and 3 clutch discs (15). Install 4 clips (22). 2 . Install cam plate (16) on camform side gear (17). 3 . On cam plate (16) install 1 clutch plate (13), 1 clutch disc (15), then 2 clutch plates. Install wave spring (14). Starting with clutch disc and alternating, install 3 clutch discs and clutch plates. Compress left-hand clutch pack and install retainer ring (12). Install 4 clips (22). TA50593 6-109

Privacy Statement
Press Release
Contact