TM 9-2320-289-34
5-17.
TRANSMISSION DIRECT CLUTCH ASSEMBLY AND FRONT BAND
MAINTENANCE (Con’t).
5.
Inspect all clutch plates and backing plate for damage. Replace if damaged.
6.
Inspect direct clutch piston for damage. Replace if damaged.
7.
Inspect piston release springs for collapsed coils or signs of distortion. Replace if coils are
collapsed or distorted,
8.
Inspect front band for damage. Replace if damaged,
9.
Inspect all oil passages to ensure that they are open. Replace any component if oil passages
cannot be blown open.
d . A S S E M B L Y
1.
Lubricate new inner seal (18) and outer seal (19) with hydraulic fluid, and seal grooves in
direct clutch piston (17) with petrolatum. Install seals with lips facing away from spring guides
(23) .
2.
Lubricate center seal (20) with hydraulic fluid and seal groove in direct clutch assembly (3)
housing with petrotatum, Install seal with lip facing up,
TA50277
5 - 96
