TM 9-2320-289-34
5-17.
TRANSMISSION DIRECT CLUTCH ASSEMBLY AND FRONT BAND
MAINTENANCE (Con’t).
14,
Remove direct clutch assembly (3)
from center support (25). Install
center support and gear unit. (See
paragraph 5-19)
e. INSTALLATION
NOTE
Front band (2) should be soaked in
hydraulic fluid a minimum of 15
minutes.
1.
Install front band (2) in transmission
case (1) with band anchor hole over
band anchor pin (27), and apply lug
(26) facing servo hole.
5-101
