TM 9-2320-289-34
5-16.
TRANSMISSION FORWARD CLUTCH ASSEMBLY MAINTENANCE (Con’t).
e.
INSTALLATION
NOTE
l Ensure that thrust washer is still adhered to forward clutch hub (4).
(See ASSEMBLY, step 11)
• Missing internal splines in forward clutch hub (4) are oil passages.
They do not have to be indexed with any particular spline on mainshaft
(5).
l When forward clutch assembly (2) Is fully seated, it will be
approximately 1.25 in.
(32 mm) from pump mounting face in
transmission case.
1.
Install forward clutch assembly (2) and turbine shaft (3), Rotate to allow direct clutch driving
hub to index with direct clutch composition plates. Ensure that end of mainshaft (5) goes
completely into forward clutch hub (4).
FOLLOW-ON TASKS:
l Install transmission oil pump, (See paragraph 5-15)
TA50272
5-91
