TM 9-2320-289-34
5-6.
TRANSMISSION DOWNSHIFT ELECTRICAL CONNECTOR REPLACEMENT.
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Equipment Condition
Materials/Parts
l Transmission filter assembly removed.
l One “O“ ring seal
(See TM 9-2320-289-20)
l Hydraulic fluid (Item 40, Appendix B)
a.
REMOVAL
1.
Disconnect engine wiring harness connector (5) from downshift electrical connector (1).
Disconnect detent solenoid wire (2) from end of downshift electrical connector inside
transmission case (4),
2.
Compress prongs on downshift electrical connector (1) and remove from transmission case
(4) .
3.
Remove “O“ ring seal (3) from downshift electrical connector (1) and discard.
TA50214
5-24
