TM 9-2320-289-34
5-6.
TRANSMISSION DOWNSHIFT ELECTRICAL CONNECTOR REPLACEMENT
(Con’t).
b.
INSTALLATION
1 .
Lubricate new “O” ring seal (3) with hydraulic fluid and install in downshift electrical connector
(1) groove.
2 .
Install downshift electrical connector (1) with lock tabs pointing into transmission case (4) and
locator tabs in notch on side of transmission case.
3 .
Connect detent solenoid wire (2) and engine wiring harness connector (5) to downshift
electrical connector (1).
FOLLOW-ON TASKS:
l Install transmission filter assembly. (See TM 9-2320-289-20)
5-25
