TM 9-2320-289-34
5-5.
GOVERNOR ASSEMBLY MAINTENANCE.
This task covers:
a. Removal
d. Assembly
b. Disassembly
e. Installation
c. Cleaning and Inspection
INITIAL SETUP:
Equipment Condition
Materials/Parts
• Transfer case in “2H.”
l
l
Tools/Test Equipment
l
l Torque wrench
l
General Safety Instructions
l Dry cleaning solvent is flammable and must not be
well-ventilated area.
One gasket
Two pins
Dry cleaning solvent
(Item 23, Appendix B)
Hydraulic fluid (Item 40,
used near open flame.
• Compressed air used for cleaning purposes should never exceed 30 psi (207
Appendix B)
Use only in a
kPa),
a.
REMOVAL
NOTE
A suitable container should be used to catch hydraulic fluid when
removing governor cover (2) and governor assembly (4).
1.
Remove 4 bolts (1) and governor cover (2) from transmission case (5). Remove gasket (3)
and discard. Remove governor assembly (4) from bore of transmission,
TA50210
5-20
