c. INSTALLATION 1

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
363

TM 9-2320-289-34 5-4. TRANSMISSION OIL COOLER SUPPLY AND RETURN PIPES MAINTENANCE (Con’t). c. INSTALLATION 1 NOTE If connecting oil cooler supply pipe (9) and return pipe (10) to transmission (1), perform steps 1, 3, and 4. 1. If removed, install 2 connectors (2) to transmission (1). Install transmission oil cooler return pipe (10) to top connector and transmission oil cooler supply pipe (9) to bottom connector. Tighten 2 fittings (11). 2. Connect transmission oil cooler return pipe (10) to top of radiator (4) and transmission oil cooler supply pipe (9) to bottom of radiator. Tighten 2 fittings (3). 3. Install clip (6) to oil cooler supply pipe (9) and return pipe (10). Install oil cooler supply pipe and return “pipe to clip (5) at engine oil pan. 4. Install clip (6) to torque converter cover (7) with bolt (8). FOLLOW-ON TASKS: l Check hydraulic fluid level. (See LO 9-2320-289-12) 5-19

Privacy Statement
Press Release
Contact