TM 9-2320-289-34
5-7.
TRANSMISSION CONTROL VALVE ASSEMBLY AND DETENT SOLENOID
MAINTENANCE (Con’t).
CAUTION
Ensure that manual valve (7) does
not fall out of its bore in control
valve assembly (3). Failure to
follow this caution may result in
damage to manual valve.
2 .
Remove 10 remaining bolts (6). Lift
up on 2 governor pipes (5) and
remove control valve assembly (3)
and governor pipes as a unit.
NOTE
Governor screen assembly (8) may
be found in governor feed pipe
hole (9) or in governor pipe (5).
Governor screen assembly must
be installed In same hole from
which it was removed,
3 .
Mark feed pipe hole (9) and remove
governor screen assembly (8).
4 .
Remove 2 governor pipes (5) from
control valve assembly (3). Remove
control valve body gasket and
discard.
TA50215
5-27
