TM 9-2320-289-34
4-5.
STARTER TESTING AND REPAIR (Con’t).
NOTE
Ensure that position of field coil assembly (38) is noted for assembly.
12.
Remove 8 pole shoe screws (36) and 4 pole shoes (37). Remove field coil assembly (38) from
field housing (3). Remove alinement pin (39) if damaged.
c .
CLEANING AND INSPECTION
I
WARNING
• Dry cleaning solvent P-D-680 is toxic and flammable. Always wear
protective goggles and gloves and use only in a well-ventilated area.
Avoid contact with skin, eyes, and clothes and DO NOT breathe vapors.
DO NOT use near open flame or excessive heat. The solvent’s flash
point is 100°F-138°F (38°C-59°C). If you become dizzy while using
cleaning solvent, immediately get fresh air and medical help. If solvent
contacts eyes, immediately wash your eyes with water and get medical
aid.
• Compressed air used for cleaning purposes should never exceed 30 psi
(207 kPa). Use only effective chip guarding and personnel protective
equipment (goggles/shield, gloves, etc.). Failure to follow this warning
may result in serious injury to personnel.
TA50799
4-31
