TM 9-2320-289-34
4-5.
STARTER TESTING AND REPAIR (Con’t).
4.
Remove 3 screws (26), washers (25), and center bearing (19) and armature (17) assembly
from drive gear housing (1). Remove and discard fiber washer (27).
5.
Remove thrust washer (23). Slide a socket or piece of pipe over end of armature (17) shaft
against collar (22). Drive collar off stopring (24), and remove stopring and collar.
6.
Separate armature (17), center bearing (19), washer (20), and drive assembly (21). Remove
bushing (18) if damaged.
TA50797
4-29
