TM 9-2320-289-34
4-5.
STARTER TESTING AND REPAIR (Con’t).
b.
DISASSEMBLY
1.
Remove screw (8) from field coil
connector (7). Remove 2 screws (9)
and Iockwashers. Rotate solenoid (2)
90 degrees, and remove solenoid
and plunger spring (10). Discard
Iockwashers.
2 .
Remove stud (4), bolt (5), and
commutator end frame (6). Remove
field housing (3) assembly from drive
gear housing (1).
3 .
Remove snapring (15) and shift lever
shaft (14), Remove shift lever (16)
and plunger (11 ) assembly from drive
assembly (21), Remove roll pin (13),
plunger, and boot (12) from shift
lever.
TA50796
4 - 28
