TM 9-2320-289-34
4-2.
ALTERNATOR TESTING AND REPAIR (ALL EXCEPT M1010) (Con’t).
9.
10.
11.
12.
CAUTION
Ensure that screw (22) is installed through rectifier bridge fiber insulator.
Failure to follow this caution will result in damage to truck electrical
system when alternator is installed.
Place rectifier bridge (7) over insulation. install screw (22) through rectifier bridge-to-regulator
jumper wire (10), rectifier bridget and rectifier bridge fiber insulator.
Connect capacitor lead (23) to rectifier bridge (7) with screw (21).
Install new negative (-) terminal stud (18) through rectifier bridge. From outside, secure with
new fiber insulator fiat washer, new Iockwasher, and new nut.
Install plastic insulator (27) to square hole in end frame (1).
TA50784
4-12
