d. COMPONENT TESTING

c . CLEANING AND INSPECTION - TM-9-2320-289-34_266

4-2. ALTERNATOR TESTING AND REPAIR (ALL EXCEPT M1010) (Cont) - TM-9-2320-289-34_268

/.25ton/TM-9-2320-289-34 CUCV Series Trucks at intermediate direct support and general support level Manual
Page Navigation
250

TM 9-2320-289-34 4-2. ALTERNATOR TESTING AND REPAIR (ALL EXCEPT M1010) (Con’t). 10. Inspect rotor slip rings (42) for scoring, wear, or pitting. (a) (b) If rings are dirty, clean with 400 grain or finer crocus cloth. Spin rotor and hold crocus cloth against slip rings until clean. If scored, worn, or pitted, true rings in lathe to 0.002 in. (0.05 mm). Finish with 400 grain or finer crocus cloth. Blow away all dust. 11. Inspect end frame and drive end housing for damage. Replace if damaged. d. COMPONENT TESTING 1. Using test light or ohmmeter, check continuity between with scale of 200 ohms or less. If there is no continuity, 2. Using test light or ohmmeter, check continuity between each stator assembly lead and stator frame (3). If continuity is not infinite, replace stator assembly. each stator assembly lead terminal replace stator assembly. TA50779 4 - 7

Privacy Statement
Press Release
Contact