TM 9-2320-289-2010-31. GAS-PARTICULATE FILTER MAINTENANCE (M1010) (Con’t).NOTE6.7.8.Both gas canisters (12) are replaced in same way.Loosen 2 hose clamps (11) andremove hoses from both ends of gascanister (12).Loosen 2 band clamps (13) andremove gas canister (12).Dispose of gas canister (12)properly, as it cannot be reused.b.CLEANING AND INSPECTIONWARNINGDry cleaning solvent P-D-680 is toxic and flammable. Always wearprotective goggles and gloves and use only in a well-ventilated area. Avoidcontact with skin, eyes, and clothes and DO NOT breathe vapors. DO NOTuse near open flame or excessive heat. The solvent’s flash point is100°F-138°F (38°C-59°C). If you become dizzy while using cleaningsolvent, immediately get fresh air and medical help. If solvent contactseyes, immediately wash your eyes with water and get medical aid.CAUTIONDO NOT allow moisture to come in contact with filter material or filter willbe damaged.1.Clean gas-particulate filter (9) and manifold (5) with a cloth moistened with dry cleaningsolvent.2.Inspect manifold (5), gas-particulate filter (9), and all gaskets for damage. Ensure thatgaskets will make an airtight seal. If gaskets are damaged, notify your supervisor.TA5002010-115
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
