TM 9-2320-289-2010-30. INTERIOR SLIDING DOOR REPLACEMENT (M1010) (Con’t).5.6.7.8.9.10.11.Install handle (8) with setscrew.Fully open roller track (3). Hold roller track stationary and install sliding door (2).NOTEEnsure that bolts (1) are installed with heads facing toward rear of truck.Close sliding door (2) and install right bolt (1) and nut (4).Partially open sliding door (2) and install left bolt (1) and nut (4).Clean area where floor track (15) is to be installed. InstallInstall 2 new screws (14) at bracket (13) into side frame.Check operation of sliding door (2). Adjust sliding dooradjusting height, and tightening nuts.floor track with 2 screws (12).height by loosening 2 nuts (4),TA5001810-112
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
