10-25. DRIVERS AND PASSENGERS SEAT AND SEATBELT REPLACEMENT (M1010) (Cont)

10-25. DRIVERS AND PASSENGERS SEAT AND SEATBELT REPLACEMENT (M1010) (Cont) - TM-9-2320-289-20_592

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
570

TM 9-2320-289-20 10-25. DRIVER’S AND PASSENGER’S SEAT AND SEATBELT REPLACEMENT (M1010) (Con’t). 5. 6. 7. 8. 9. Install 2 brackets (10) to driver’s seat (11) with 4 bolts (9). If removed, install seat latch spring (16) to each seat adjuster assembly (7). Install 2 seat adjuster assemblies (7) to driver’s seat (11) and to 2 brackets (10) with 6 bolts (14). Tighten bolts to 20-30 Ib.-ft. (27-41 N•m). Install outer spring (13) between front of left adjuster assembly and back of driver’s seat. NOTE A properly installed wire assembly (8) should not be in tension. Lock both seat adjuster assemblies (7). Install wire assembly (8) with wire in middle hole at right adjuster assembly. Move wire to forward or rearward hole as required to adjust for proper tension. Install driver’s seat (11) and 2 seat adjuster assemblies (7) to floor-mounted weldnuts (15) with 4 bolts (12). Tighten bolts to 25 Ib.-ft. (34 N•m). TA50008 10-95

Privacy Statement
Press Release
Contact