TM 9-2320-289-20
—
10-25. DRIVER’S AND PASSENGER’S SEAT AND SEATBELT REPLACEMENT
(M1010).
This task covers:
a.
Removal
b. Installation
INITIAL SETUP:
Tools/Test Equipment
• Torque wrench
a.
REMOVAL
NOTE
If removing driver’s seatbelt assembly (3), perform step 1.
If removing passenger’s seatbelt assembly (6), perform steps 2 and 9.
If removing driver’s seat (11) and seat adjuster assemblies (7), perform
steps 3-7,
If removing passenger’s seat and supports, perform steps 9-11.
1.
Remove bolt covers and remove bolt (2) and 2 floor-mounted bolts (4). Disconnect electrical
connector at seatbelt retractor (5). Remove driver’s seatbelt assembly (3).
TA50005
10-92
