TM 9-2320-289-2010-25. DRIVER’S AND PASSENGER’S SEAT AND SEATBELT REPLACEMENT(M1010) (Con’t).9.10.11.Remove 2 bolts (18) and passenger’sseatbelt assembly (6) from 2 rearsupports (19).Remove 2 bolts (23) at 2 frontsupports (22). Remove passenger’sseat (17) with attached supports (19and 22) from bracket assembly (21).Remove 8 bolts (20), 2 front supports(22), and 2 rear supports (19) frompassenger’s seat (17).b.INSTALLATION If installingsteps 1-4.NOTEpassenger’s seat (17) and supports (19 and 22), performIf installing seat adjuster assemblies (7) and driver’s seat (11), performsteps 5-9.If installing passenger’s seatbelt assembly (6), perform steps 4 and 10.If installing driver’s seatbelt assembly, perform step 11.1.Install 2 front supports (22) and 2 rear supports (19) to passenger’s seat (17) with 8 bolts(20). Tighten bolts to 15-25 Ib.-ft. (20-34 N•m).2.Position passenger’s seat (17) with attached supports (19 and 22) at truck floor.3.At right front corner, install bolt (23) through front support (22) into floor. At left front corner,install bolt through front support into bracket assembly (21). DO NOT FULLY tighten bolts.4.Install passenger’s seatbelt assembly (6) at 2 rear supports (19) with 2 bolts (18). Tightenbolts to 40 Ib.-ft. (54 N•m). Tighten bolts (23) to 25 Ib.-ft. (34 N•m).TA5000710-94
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
