TM 9-2320-289-20
10-26. REAR DOOR ASSEMBLY, HINGES, AND LOCK MECHANISM REPLACEMENT
(M1010) (Con’t).
2.
Install bottom lock rod (16) through access panel (18) opening and out bottom of door
assembly (6).
3.
Install top lock rod (7) to lock mechanism (11) with rubber washer, steel washer, and new
cotter pin.
4.
Install top lock rod (7) with attached lock mechanism (11) through access panel (18) opening
and out top of door assembly (6), Once installed, have assistant secure top lock rod to keep it
from falling out of position.
5.
Install bottom lock rod (16) to lock mechanism (11) with rubber washer, steel washer, and new
cotter pin.
6.
Loosely install 2 bolts (12) and new locknuts (10) through door assembly (6) and lock
mechanism (11).
TA50011
10-100
