10-25. DRIVERS AND PASSENGERS SEAT AND SEATBELT REPLACEMENT (M1010) (Cont)

10-25. DRIVERS AND PASSENGERS SEAT AND SEATBELT REPLACEMENT (M1010)

/.25ton/TM-9-2320-289-20 CUCV Series Trucks at Unit level Manual
Page Navigation
568

TM 9-2320-289-20 10-25. DRIVER’S AND PASSENGER’S SEAT AND SEATBELT REPLACEMENT (M1010) (Con’t). 2. 3. 4. 5. 6. 7. 8. Remove bolt cover and remove bolt (1). Remove 2 front bolts (12) securing 2 seat adjuster assemblies (7) (15). Adjust driver’s seat (11) forward and remove 2 rear bolts (12). adjuster assemblies (7). NOTE to floor-mounted weldnuts Remove seat and 2 seat Note location of outer spring (13) and wire assembly (8) for installation. Remove wire assembly (8). Inspect 2 seat latch springs (16) at each seat adjuster assembly (7) and remove if damaged or broken, Remove outer spring (13) from front of left seat adjuster assembly (7) and driver’s seat (11). Remove 6 bolts (14) and 2 seat adjuster assemblies from driver’s seat and brackets (10). Remove 4 bolts (9) and 2 brackets (10) from driver’s seat (11). TA50006 10-93

Privacy Statement
Press Release
Contact