TM 9-2320-289-2010-23. DRIVER’S,PASSENGER’S,REAR BENCH SEAT, AND SEATBELTREPLACEMENT (M1009) (Con’t).NOTEDriver’s and passenger’s seat adjusters (4 and 8) are installed the sameway but component locations are reversed. Driver’s seat adjusterinstallation is described.4.Install outer seat adjuster (4) and inner seat adjuster (8) on seat (9) with 4 bolts (14). Lockouter seat adjuster and inner seat adjuster in place. Tighten bolts to 20-30 Ib.-ft.(27-41 N•m).5.Install wire assembly (5). If wireassembly is too loose or too tight,disconnect from inner seat adjuster(8) adjustment hole and connect to adifferentinnerseatadjusteradjustment hole as required.6.Position seat (9) and seat adjuster(8) assembly in truck and install with2 forward bolts (7) and 2 rear bolts(11). Tighten bolts to 20-25 Ib.-ft.(27-34 N•m).TA5000310-88
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
